Separating the refill: The two-part label can be easily split into two, individually sealed stacks.
Removing wafers from the refill: Remove the protective film and lift the top wafer, including the top shell, off the stack. Use the finger tabs on either end of the water will lift too.
Refill the rack: It’s so easy! Simply place the wafer, top shell and spacer into an empty rack and click securely in place. The top shell can either remain inside the rack for extra protection or transferred back to the top layer of the open refill if not racking all five at the same time.
Close the lid, refilling is complete: Refilling a rack takes only seconds. The refilled rack can now be used or autoclaved, depending on your application.
Recover the partially used stack: The remaining tips of the refill can be protected from contamination by replacing the top shell. There’s no need to remove the bottom shell when using the last wafer. Both the bottom shell and the wafer fits inside the new rack.
FAQ
Prime a pipette tip like a pre-wet. the performance has been increased with the model. 1250ul filter tips You can get repeater pipettes if you are dispensing lots of aliquots of the sample solution and multi-channel pipettes.
The 1250ul filter tips and all kinds of tip can be used for once a time. that we can reuse the tip by cleaning some boiled water in a direction can use 10-25 times. but Non-sterile tips do not expire.
